Technical Articles (Page 1 of 1) Deltron Enclosures

7|7|2020 : Selecting an Enclosure Finish

You've selected your aluminium enclosure and now you're asking whether it needs a coating, what benefits it may provide and which one to select.

27|2|2019 : All About Alloys

Read up on alloys, what they are, what they are used for and how to choose the best one for your project.

29|1|2019 : What is a Gasket?

A Guide to Gaskets

26|6|2018 : Understanding NEMA Ratings

NEMA ratings and standards was developed for electrical enclosures to ensure safety, compatibility and proper function of electrical products.

7|4|2017 : Choosing Between Polycarbonate, ABS and Die-cast Aluminium

When selecting an enclosure, the first consideration is the material. They can be manufactured from a range of metals and plastics, each offering different benefits and your decision must be based on the surrounding environment.

20|8|2015 : Choosing between materials for your enclosure

When choosing an enclosure, material selection is most likely, the first step you should take.

8|7|2015 : What is Ingress protection (IP)?

Ingress protection ratings or IP ratings, refer to the level of protection offered by an electrical enclosure, against solids and liquids.

7|4|2015 : Four Considerations when Choosing an Electronic Enclosure

Although electronic enclosures arent industry specific, engineers have to be clear on the suitability of an enclosure for their application and sector.

Technical Articles

Blog